Mechanical Tubing Pipes

Pipes are made of many materials including metals such as Stainless Steel, Carbon Steel, Alloy Steel, Nickel Alloy, Titanium Pipes, Duplex & Super Duplex, Tool Steel, Chrome Molly, Cupro Nickel, Copper Nickel, Corten Steel Pipe, Brass, Galvanised Steel

Tubing used for mechanical and light gauge structural applications. Mechanical tube is produced to meet specific end use requirements, specifications, tolerances and chemistries. This allows for more specific property uniformity throughout the tube compared to standard pipe or tube. While Mechanical tube can be produced to standard specifications when requested, it is often produced to “typical” properties that focus mainly on the yield strength for a precise size and wall thickness. In some applications with severe forming, yield strength may not even be specified and the mechanical tube is produced to be “fit for use”. Mechanical tubing encompasses a wide range of both structural and non-structural applications. 

MECHANICAL TUBING TYPE

Mechanical tubing is manufactured to typical mechanical tube properties in accordance with ASTM A513 and ASTM A519 specifications. Some of the most common types of mechanical tubing are Drawn Over Mandrel tubing (DOM), Hot Rolled/Finished Seamless tubing (HRS), Cold Drawn Seamless tubing (CDS), Hot Rolled or Cold Rolled Electric Weld tubing (HREW/CREW), and 4140 Alloy tubing.  Mechanical tubing is not limited to these specifications and can be produced to exact customer requirements when appropriate.  Mechanical products are ordered to a specific outside dimension (OD) and “gauge” or wall thickness or by outside dimension (OD) and inside dimension (ID).  Additionally, most mechanical tubing can be available in galvanized as well upon request.

AVAILABLE SHAPES:

  • Square
  • Rectangle
  • Round
  • Custom Shapes (Must be large quantities)

SIZE RANGE:

  • Square – From 0.500” to 2.500” 
  • Rectangle – From 1.000” x 0.500” to 4.000” x 2.000”
  • Round – From 0.125” OD to 26.000” OD

Details Overview

Products Cold Rolled Seamless Steel Tubes For Precision Applications
Type  Cold-rolled precision seamless tube
Steel grade  10#-45#, 16mn, Q195-Q345, ST35-ST52, 10#, 20#, 45#, 16mn, Q235, Q345, Q195, Q215, ST37, ST52, ST37-2, ST35
Outer Diameter  4mm-76mm
Wall Thickness  0.5mm-13mm
Length  Specific or random 
Manufacture Cold Rolled
Place of Origin  India
Technique  Cold drawn and Cold rolled
Application Hydraulic Cylinder 
Certification  ISO9001&IATF16949
Tolerance  ±0.1mm
Product Marking  Non
Surface Treatment Oil-dip Anti-rust
MOQ 3 tons
Packing Inner waterproof plastic film sleeve,
Outer woven bag.Plastic caps for each pipe.
Each bundle is bound with steel bars.
Shipment  20’GP,40’GP,40’HQ,FCL or LCL,BULK Cargo
Delivery Terms  EXW,FOB,CIF,CFR
Payment Terms  1) 30% T/T advance,T/T balance before shippment
2)  L/C at sight
Lead time  1-20 tons 20-50tons  above 50 tons 
15-20 days  20-30 days  To be negotiated